/////G3 Advanced Filtration System, up to 80 US Gal (300 L)

G3 Advanced Filtration System, up to 80 US Gal (300 L)

SKU: A410 | UPC: 015561104104
Format: 9.8 L x 9.8 W x 9.72 H" (24.9 L x 24.9 W x 24.7 H cm)
Categories: , , ,



The perfect convergence of beauty, brains and brawn, the G-series redefines aquatic filtration by offering a unique combination of aesthetics, advanced performance features and Fluval’s exclusive Hydrotech™ monitoring system.

?
SHARE THIS PAGE
  • Designed for aquariums up to 80 gallons
  • Hydrotech™ Monitoring System – Stores and communicates historical and real-time data (water temperature, water flow, conductivity, salinity), alerting user when set parameters deviate from optimal range
  • Maintenance Scheduler easily programmed for important reminders (i.e. changing filter media)
  • Quick Release System – Direct top access to pre-filter and chemical cartridges for fast replacement and rinsing – no need to dissemble the filter
  • 3-stage filtration – mechanical, chemical and biological
  • Aqua-Stop valves allow you to stop water flow and disconnect hosing quickly and easily
  • Easy prime button starts water flow without manual siphoning
  • Cast zama locking levers and internal silicone gasket for an ultra secure seal
  • Double wall construction eliminates motor noise
  • Made in Italy
  • For use in freshwater and saltwater aquariums
MODEL
Item #
G3
A410
G6
A412
UPC015561104104015561104128
Aquarium Capacity80 US Gal
(300 L)
160 US Gal
(600 L)
Pump Output
(120V/60Hz)
365 US Gal/h
(1380 L/h)
665 US Gal/h
(2510 L/h)
Pump Output
(230-240V/50Hz)
340 US Gal/h
(1285 L/h)
650 US Gal/h
(2460 L/h)
Filter Circulation185 US Gal/h
(700 L/h)
265 US Gal/h
(1000 L/h)
Mechanical Area (foam)204 in2
(520 cm2)
386 in2
(980 cm2)
Biological Volume0.6 US Gal
(2.36 L)
1.05 US Gal
(4 L)
Filtration Volume1.32 US Gal
(5 L)
2.3 US Gal
(8.7 L)
Head height
(50Hz)
5.1ft
(1.8 m)
6.1ft
(2.1 m)
Head height
(60Hz)
6.2ft
(1.9 m)
7.6ft
(2.3 m)
Wattage
(120V/60Hz)
18 W27 W
Wattage
(230-240V/50Hz)
17 W28 W
Dimensions
(L x W x H)
9.8 x 9.8 x 9.72"
(24.9 x 24.9 x 24.7 cm)
9.8 x 9.8 x 12.83"
(24.9 x 24.9 x 32.6 cm)

2 YEAR LIMITED WARRANTY

Fluval G Advanced Filtration System offers a 2-year warranty from the date of purchase against defects in material or workmanship under normal aquarium usage and service. We offer a 2-year warranty on all nonreplaceable parts, which means that the filter will be repaired or replaced at the manufacturer’s discretion, free of charge, when the complete pump is returned with proof of purchase and postage paid. Please include $4.00 to cover shipping and handling.

INSTRUCTION MANUAL

DOWNLOAD
G SERIES2019-03-25T05:47:53+00:00

G SERIES

SEARCH ANOTHER CATEGORY

I’ve noticed decreased performance and the need for increased maintenance frequency on my canister filter. Am I doing something wrong?

This usually indicates an increased load on your filter due to either the growth of your fish, the recent introduction of additional fish, increased waste production (leftover food, excrement, etc.), or clogged filter media in need of replacement.

I have a marine tank and noticed bursts of air coming out of my filter output. Should I be concerned?

Air input into your system is most likely coming from the skimmer. Fine air bubbles are gathering in the canister filter and are being ejected in bursts. Consider adding a bubble trap for your skimmer.

I replaced the impeller of my canister filter and noticed a small leak coming from the handle when shutting down. What should I do?

The leak is most likely from the canister O-ring. Before you purchase a replacement, remove and clean it with warm water. Thoroughly wipe the receiving groove in the filter with a soft cloth. Apply Fluval silicone lubricant (#A325) to the O-ring.

How does head height affect filter output performance?

G series filters are closed recirculation filter systems: head height has no real impact on performance. The length of tubing and the types of filter media are key factors affecting filter output performance. We recommend never exceeding the specified vertical distance in your instruction manual as this will cause the filter to exceed the maximum head pressure value, which could cause the filter to leak and fail.

I change the carbon in my filter every couple of weeks. Is this too often?

No. It’s better (and easier) to prevent odors rather than having to remove them once they’ve accumulated. Some fish are messy eaters, or are more prone to producing large amounts of waste, so prevention is key.

Do you have any tips for fixing common filtration issues?

I found a fish stuck to the intake of my filter. Is the flow too strong?

You don’t need to be concerned about your filter being too powerful for use with healthy fish, many of whom swim in natural habitats with much stronger currents. If a fish became stuck to the intake of your filter, it’s likely that the fish was already sick. Take note that you can adjust the filter output strength to suit your particular fish species.

I just purchased a Fluval canister filter for my well-stocked tank. Is there additional media required, other than what came with the filter?

Fluval Total Clear will crystallize the water and rapidly remove organics, providing better overall water quality. Also consider adding a coarse pre-filter media at the bottom of the filter to support improved long-term performance.

Why is my canister filter emitting bursts of fine air bubbles on my aquarium?

FRESHWATER: It’s important to perform regular filter maintenance (media rinsing and replacement) to prevent media from compacting, which can result in air accumulation. Also make sure to verify the inlet rubber hose connector that attaches to the siphon tube, which does dry out over time and becomes hard and non-flexible, thus requiring periodic replacement.

SALTWATER: This is probably due to your filter taking in the fine air bubbles introduced to the aquarium by protein skimmers. Make sure to use an effective bubble trap at the skimmer output or within the sump to prevent this from happening.

How do I know when it’s time to change my filter media?

Why is the motor of my canister filter making a low, rumbling noise?

Noise originating from the motor suggests that the impeller assembly needs to be replaced. As the only moving part in your filter that operates 24 hours/day, the impeller does eventually wear and is therefore not covered under warranty. Also, verify that the filter has been properly primed (always ensure the filter output is above the water surface when priming), as this will help ensure trapped air is not the cause of the noise.

Why do conductivity readings sometimes differ from those taken by a refractometer?

The Fluval G conductivity accuracy is rated at +/- 8%, so it is normal to see a difference. More variance is to be expected in marine aquariums, as fine air bubbles originating from the protein skimmer can interfere with the conductivity sensor and cause inaccurate readings).

Why do the instructions for the TRI-EX filter cartridge recommend to first lower the phosphate levels?

This is simply to help you get the best results and lifespan out of this resin.

My filter media cartridges sometimes drip water onto the LCD display when removed. Can this damage the unit?

We advise removing water from the LCD display as soon as possible, as it is not designed to be waterproof.

Can’t Find an Answer?

Contact Us

You may also like…