////SP2 SEA Aquarium Pump, up to 950 US GPH (3600 LPH)

SP2 SEA Aquarium Pump, up to 950 US GPH (3600 LPH)

SKU: 14335 | UPC: 15561143356
Format: up to 950 US GPH (3600 LPH)
Categories: , ,



Fluval SP-Series sump pumps deliver exceptional water flow performance and can plumbed either internally or externally from the aquarium.

?
SHARE THIS PAGE
  • Powerful flow rate and head height delivery
  • Smart-Pump™ Technology (SP4/SP6 models) – digital system controls directional start-up, monitors RPM and shuts off unit in case of overheating
  • Alumina Ceramic impeller shaft and bearing prevent calcium build-up, reduce maintenance frequency and ensures longer pump life
  • Includes barbed fittings – compatible with North American and European fittings
  • Operates at a cooler temperature to avoid affecting water temperature
  • Able to function internally or externally of aquarium
  • Energy-efficient European engineering
  • Quiet operation
  • For use in freshwater or saltwater aquariums
MODEL
Item #
SP2
14335
SP4
14337
SP6
14339
UPC015561143356015561143370015561143394
Flow Rate
(120V/60Hz)
950 US Gal/h
(3600 L/h)
1822 US Gal/h
(6900 L/h)
3434 US Gal/h
(13 000 L/h)
Flow Rate
(230-240V/50Hz)
950 US Gal/h
(3600 L/h)
1980 US Gal/h
(7500 L/h)
3250 US Gal/h
(12 300 L/h)
Wattage
(120V/60Hz)
55 W88 W135 W
Wattage
(230-240V/50Hz)
58 W90 W100 W
Head Height
(max.)
6.2"
(1.9 m)
11.5"
(3.5 m)
12.1"
(3.7 m)
Dimensions
(L x W x H)
7.5 x 7 x 4.5"
(19 x 17.8 x 11.4 cm)
7.5 x 7 x 4.5"
(19 x 17.8 x 11.4 cm)
9 x 7.5 x 4.5"
(22.8 x 19 x 11.4 cm)

3 YEAR LIMITED WARRANTY

Fluval Sea Aquarium Pumps are guaranteed against defects in material or workmanship under normal aquarium usage and service for 3 years. We offer a 3 year guarantee on all non replaceable parts which means that the pump will be repaired or replaced at the manufacturer’s discretion, free of charge, when the complete pump is returned with proof of purchase and postage paid. This warranty does not apply to any pump that has been subjected to misuse, negligence or tampering or commercial use. No liability is assumed with respect to loss or damage to livestock or personal property irrespective of the cause thereof.

INSTRUCTION MANUAL

SP SERIES2019-03-07T16:58:30-05:00

SP SERIES

SELECT AN FAQ CATEGORY

I just purchased an SP sump pump. Should I hard plumb my aquarium or go with flexible hosing?

Fluval pumps include various fittings that allow you to consider both options. For the average hobbyist, we usually recommend flexible hosing as it has greater noise-dampening properties and requires less use of elbows and other fittings that can diminish pump output performance. It is also easier to replace, if necessary.

Why is air entering my aquarium after setting up an SP sump pump?

A bubble trap located within the sump, after the output of your skimmer, can help prevent this issue – we recommend installing one. Otherwise, the pump inlet may be drawing air from the surface. If this is the case, we recommend installing an elbow of the same diameter as your pump inlet and directing it towards the bottom of the sump.

My aquarium system’s hard plumbing is of a different diameter than Fluval sump pumps’ 1.25″ fittings. What should I do?

Adapters are readily available at various plumbing part retailers – you shouldn’t have any issues hooking up Fluval sump pumps.

Can’t Find an Answer?

Contact Us

 

 

 

 

You may also like…